VLSI interview questions and answers, vlsi companies, vlsi jobs, vsi projects, vlsi design, vlsi ppt, vlsi companies, top vlsi companies, vlsi projects, fpga, asic ~ For Job Seekers

Hi iam starting new Section With Name VLSI( very Large scale Integration) in this i will post

VlSI interview questions, vlsi companies, vlsi jobs, vlsi projects, vlsi design, vlsi ppt, vlsi companies, top vlsi companies , vlsi projects, fpga, asic

Today iam Posting VLSI Interview questions and answers

1. Why does the present VLSI circuits use MOSFETs instead of BJTs explain?
Answer

Compared to BJTs, MOSFETs can be made very small as they occupy very small silicon area on IC the chip and are relatively simple in terms of manufacturing. Moreover digital and memory ICs can be implemented with the circuits that use only MOSFETs i.e. no resistors, diodes, etc.

2. What are the various regions of operation of MOSFET? How are those regions used? Explain?Answer

MOSFET has three regions of operation that is the cut-off region, the triode region, and the saturation region.
The cut-off region and the triode region are used to operate as switch. The saturation region is used to operate as an amplifier.

3. What is threshold voltage Explain?
Answer

The value of voltage between the Gate and Source i.e. V_GS at which a sufficient number of mobile electrons accumulate in the channel region to form a conducting channel is called threshold voltage (V_t is positive for NMOS and negative for PMOS).

4. What does it mean term the channel is pinched off?
Answer

For a MOSFET when V_GS is greater than V_t, a channel is induced. As we increase V_DS current starts flowing from Drain to Source (triode region). When we further increase V_DS, till the voltage between gate and channel at the drain end to become V_t, i.e. V_GS - V_DS = V_t, the channel depth at Drain end decreases almost to zero, and the channel is said to be pinched off. This is where a MOSFET enters saturation region.

5. Explain the three regions of operation of a MOSFET. and Give Difference?
Answer

Cut-off region: When V_GS < V_t, no channel is induced and the MOSFET will be in cut-off region. No current flows.
Triode region: When V_GS ≥ V_t, a channel will be induced and current starts flowing if V_DS > 0. MOSFET will be in triode region as long as V_DS < V_GS - V_t.
Saturation region: When V_GS ≥ V_t, and V_DS ≥ V_GS - V_t, the channel will be in saturation mode, where the current value saturates. There will be little or no effect on MOSFET when V_DS is further increased.

6. What is channel length modulation Explain?
Answer

In practice, when V_DS is further increased beyond saturation point, it does has some effect on the characteristics of the MOSFET. When V_DS is increased channel pinch-off point starts moving away from the Drain and towards the Source. Due to which the effective channel length decreases, and this phenomenon is called as Channel Length Modulation.

7. Explain depletion region. Briefly
Answer

When a positive voltage is applied across the Gate, it causes the free holes (positive charge) to be repelled from the region of substrate under the Gate (the channel region). When these holes are pushed down the substrate they leave behind a carrier-depletion region.

8. What is body effect . Explain?
Answer

Usually, in an integrated circuit there will be several MOSFETs and in order to maintain cut-off condition for all MOSFETs the body substrate is connected to the most negative power supply (in case of PMOS most positive power supply). Which causes a reverse bias voltage between source and body that effects the transistor operation, by widening the depletion region. The widened depletion region will result in the reduction of channel depth. To restore the channel depth to its normal depth the VGS has to be increased. This is effectively seen as change in the threshold voltage - V_t. This effect, which is caused by applying some voltage to body is known as body effect.

9. Give various factors on which threshold voltage depends.on ?
Answer

As discussed in above question, the V_t depends on the voltage connected to the Body terminal. It also depends on the temperature, the magnitude of V_t decreases by about 2mV for every 1^oC rise in temperature.

10. Give the Cross-sectional diagram of the CMOS.(common metal oxide)
Answer